Nationality: Yemeni

Date of birth: 3rd July 1975

Place of birth: Yemen

Address: Faculty of Engineering, Sana’a University

Education and Qualifications

• B. Sc in Mechanical Engineering, University of Sana’a, Sana’a, Yemen, (1992-1997).

• M. Sc in Mechanical Engineering (Thermal Power), Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut, Egypt, (2002-2005). The dissertation title is “Analytical Investigation of Heat and Mass Transfer through the Sodium-Mist Dispersion in the Cover Gas of a Sodium-Cooled Fast Reactor”.

• PhD in Mechanical Engineering (Heat Transfer, Air Pollution, and Computational Fluid Dynamics), Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut, Egypt, (2006-2010). The thesis title is “A Study on the Effects of Air Pollutants and Dispersion in Urban Atmospheres”.

Adminstration Positions and Work Experience

• 2 August 2015 – to date: Head of Mechanical Engineering Department, Faculty of Engineering, Sana’a University, Yemen.

• October 2013 – to date: Member of Quality Assurance Unit, Faculty of Engineering, Sana’a University.

• December 2013 – to date: Member of Project Implementation Committee of utilization Spread of Solar Energy Technology, Ministry of Industry & Trade, Republic of Yemen.

• March 2011- to date: Assistant professor at Mech. Eng. Dept., Sana’a University, Sana’a, Yemen.

• 2012 – to date: Part time lecturer at University of Science and Technology, Faculty of Engineering, Sana’a, Yemen.

• 2014 – to date: Part time lecturer at Emirates International University, Faculty of Engineering and IT, Sana’a, Yemen.

• 2012 and 2013: Part time lecturer at University of Thamar, Faculty of Engineering, Thamar, Yemen.

• May 2012 – September 2013: Member of Central Control, Faculty of Engineering, Sana’a University, Yemen.

• June 2002 – to December 2010: Research assistant, Dept. of Mech. Eng., Assiut University, Assiut, Egypt.

• August 1998 – to August 2001: Demonstrator, Mech. Eng. Dept. – Sana’a University, Sana’a, Yemen.

Vocational Training

• Workshop of Matching the learning Outcomes of the Faculties of Engineering in the Republic of Yemen for the needs of the Labour Market, Council of Accreditation & Quality Assurance, Sana’a, Yemen, 5-6 March 2017.

• Ninth Yearly Training Program of Faculty Members Professional Development (30 hours), Academic Development &Quality Assurance Centre, Sana’a University, Sana’a, Yemen, 6-16 February 2017.

• First Workshop for Specification of Academic Programs and Courses, Emirates International University, Sana’a, Yemen, 5-8 November 2014.

• Preparing Course of Experts of Academic Program Development, Council of Accreditation & Quality Assurance, Sana’a, Yemen, 8 August – 2 September 2014.

• Course on CC/0004/14: Mechatronics Program, University of Kuala Lumpur, Malaysia France Institute, 21 – 25 April 2014.

• Workshop of Courses Specification, Faculty of Engineering, Sana’a University, Yemen 3-5 July 2012.

• International Science Partnership between Yemen and US Scientists, Federation of American Scientists, Middle East Scientific Institute for Security, Amman, Jordan 25-28 June 2012.

• Evaluation of the Environmental Impact of Air Pollutants, National Research Centre, Training and Capabilities Development Centre, Cairo, Egypt, April 2006.

• Environmental Impact Assessment for Projects, Research Centre, Institute of Graduate Studies & Research, University of Alexandria, Alexandria, Egypt, May 2007.

• Using of the Technology in Teaching, Faculty and Leadership Development Project, Assiut University, Assiut, Egypt, June 2007.

• Designing of the Course Program, Faculty and Leadership Development Project, Assiut University, Assiut, Egypt, July 2007.

• Preparing, Writing, and International Publishing of the Scientific Researches, Faculty and Leadership Development Project, Assiut University, Assiut, Egypt, July 2007.

• Environmental Impact Assessment, Atomic Energy Authority, Cairo, Egypt, November 2007.

Engineering Expertise and Consultations

• Participation in Courses Specification of Mechatronics Department, Faculty of Engineering and IT, Al-Jeel University, Yemen,2021.

• Participation in Courses Specification of Mechatronics Department, Faculty of Engineering and IT, Ar-Rasheed University, Yemen,2020.

• Participation in Program and Courses Specification of Mechanical Engineering Department, Faculty of Engineering, Science University, Yemen,2020.

• Participation in Program and Courses Specification of Mechatronics Department, Faculty of Engineering, Sana’a, University, Yemen,2020.

• Participation in Program and Courses Specification of Mechatronics Department, Faculty of Engineering, Science University, Yemen,2019.

• Participation in Preparation of National Academic Reference Standards (NARS) for Undergraduate Engineering Programs in Republic of Yemen, Council of Accreditation & Quality Assurance, Sana’a, Yemen, May 2018.

• Evaluation of opening a new program (mechatronics) at University of Sciences and technology based on commissioning of Higher Education Minister & Scientific Research, Yemen, July 2017.

• Participation in Mechatronics Program Specification, Faculty of Engineering, Sana’a University, Yemen.

• Participation in Courses Specification of Mechatronics Department, Faculty of Engineering, Science University, Yemen.

• Consultant in mechanical, HVAC and cooling works, Sunrise Training & Consultations CO., Sana’a, 771272727 – Yemen. www.sunrise-ye.com – sunrise-yemen@yemen.net.ye

• Consultant in mechanical, HVAC and cooling works, Engineering Consulting Centre, Faculty of Engineering, Sana’a University.

• Participation in Preparation of Terms of Reference (TOR) for the new building of Yemen Mobile Telecommunication Company, Engineering Consulting Centre, Faculty of Engineering, Sana’a University.

• Member of Project Implementation Committee of utilization Spread of Solar Energy Technology, 31 December 2013, Ministry of Industry & Trade, Republic of Yemen.

Research Interest

Renewable Energy Systems, Studies, Modelling and Simulation of Air Pollution Dispersion, Computational Fluid Dynamics, , Applications of Heat and Mass Transfer.

Teaching Subjects

• Courses:

Fluid Mechanics, Thermodynamics, Heat Transfer, Hydraulic Machines, Hydraulics and Pneumatics Systems, Environmental Engineering, Refrigeration & air conditioning, Engineering Drawing, Descriptive Geometry, Engineering mechanics, Mechanical Installation in buildings, Engineering Economy.

• Supervision of graduation projects in the following fields:

 Design and Fabrication of Tiltable Box-Type Solar Cooker with Tracking Mechanism.

 Miscellaneous Graduation Projects in Solar Energy Applications.

 Miscellaneous Graduation Projects in Renewable Energy Systems.

 Solar Power Plants.

 Studying And Design of Refrigeration and Air Conditioning Systems of Miscellaneous Buildings.

 Studying and Design of Mechanical Works of Miscellaneous Buildings.

 Design and Fabrication of Solar Stills.

References

• Prof. Dr. Ali Kamel Abdel-Rahman, Chairperson, Energy Resources Engineering Department at Egypt-Japan University of Science and Technology (E-JUST), Tel: +2 01006467967, Email: nada_ali54@yahoo.com.

• Prof. Dr. Mohamed AL-Bukhaiti, the Dean, Faculty of Engineering, Sana’a University, Sana’a, Yemen, Tel: +967 777161416, Email: m.albukhaiti@gmail.com.

List of Publications

1. Hamoud A. Al-Nehari, Mahmoud A. Mohammed, Abdulkarem A. Odhah, khaled Ali Alattab, Bakeel K. Mohammed, Abdulwahab M. Al-Habari, and Naser H. Al-Fahd, “Experimental and numerical analysis of tiltable box-type solar cooker with tracking mechanism”, Under Review, International Journal of Renewable Energy.

2. Hamoud A. Al-Nehari, and Adel Abdulrahman, “Facility Design of a Production Plant for Conversion of Plastic Wastes into Liquid Fuel”, Journal of Engineering Sciences, Sana’a University, Yemen, Vol. 5, No. 2, 2016.

3. Abdul-Malik E. Momin, Khaled A. Al-Attab, Mohammed A. Alshaghdri, and Hamoud A. Al-Nehari, ” Enhancement of Marib Gas Turbine Power Station using Air Cooling Fogging System”, Journal of Sciences & Technology, Vol. 21, No. 1, 2016, pp. 62-74.

4. Eiad Abdulkadir, Hamoud A. Al-Nehari, and Abdul Raqib Abdo Asaad, “Numerical Simulation on Conventional Ventilation System for Hospital Operating Room”, Journal of Sciences & Technology, Vol. 21, No. 1, 2016, pp. 21-28

5. Adel Abdulrahman, Hamoud A. Al-Nehari, and Abdulsalam N. Almakhlafy, Mohammad Baggash, “Design and Implementation of Solar Tracking System”, International Journal of Engineering and Technical Research (IJETR), Vol. 4, No. 1, 2016, pp. 2454-4698.

6. Hamoud A. Al-Nehari, Abdel-Rahman, A. K., Shafey, H. M., and Nassib, A. E., “Characterization of the Low-Speed Wind Tunnel Simulating of Urban Atmospheres”, Journal of Engineering Sciences, Assiut University, Vol. 38, No. 2, 2010, pp. 509-532.

7. Hamoud A. Al-Nehari, Abdel-Rahman, A. K., Nassib, A. E., and Shafey, H. M., “Design and Construction of a Wind Tunnel for Environmental Flow Studies Journal of Engineering Sciences, Assiut University, Vol. 38, No. 1, 2010, pp. 177-193.

8. Hamdy M. Shafey, Hamoud A. Al-Nehari, and Nabil Y. Abdel Shafy, “Modeling of the Heat and Mass Transfer through the Cover Gas of a Sodium-Cooled Fast Reactor”, Cairo 9th International Conference on Energy & Environment, Cairo, Sharm, Egypt, March, 13-17, (2005).